How we can help you with your diesel engine governor

Critical to your engine’s safe and reliable performance, governors are a vital component to maintain.

At Bartech, we offer governor expertise, a dedicated governor bay and in house test benches.

We can provide swingset governors, meaning you will always have one running that has been overhauled and, when the next overhaul is due, you will have an exchange unit ready to swap out, avoiding costly downtime.

Trust us for the quickest of turnarounds for your governor requirements, be it for parts, servicing, repair or testing.

Overhaul & Repair

All diesel engine governors that come to Bartech to overhaul include: complete dismantle, chemical clean and inspection.

A full report is made with itemised spares requirement and only with the customer’s approval will we reassemble, calibrate and test the governor.

Our diesel engine governor overhauls and repairs are performed in dedicated dust-free governor bays and are subject to strict quality inspection.

In-House Test Certificates issued with every overhaul and repair.

Testing

When you only need your diesel engine governor checking for performance, or resetting to original factory settings.

If you are having engine control problems and want to check the governor, this can help isolate any problems.

Service

We offer 24-hour 365-day service cover. This ranges from fault diagnosis and adjustments to installation visits on site.

We have the ability to re-engineer alternative diesel engine governor parts in order to increase efficiency and overcome delivery schedules that may extend expensive downtime.

Complete Governors

We can offer new or reconditioned governors, complete with a 12-month Bartech warranty.

Reconditioned governors are built to new specifications using new seals, gaskets, bearings, springs etc. Final assemblies are fully tested In-House.

Where possible, service exchange units will be supplied in order to reduce expensive downtime.

See how much you could save with our governor testing price list

Simply enter your details below to download the price list.

  • This field is for validation purposes and should be left unchanged.

How did working with Bartech benefit you / your company on this project?

“When a fault was found with the water cooler adaptor plate, a new part was sourced and sent out to the platform the following day. This meant the crane could be returned to service as planned and therefore no downtime experienced.”

What were you most impressed with working with Bartech?

“The technical knowledge and speed of sourcing the required part. The platform also commented positively on the work ethic of the engineer on the job.”

Steven Bain ~ EnerMech

What were you most impressed with working with Bartech?

“A genuine open and honest customer focused approach.

A willingness to evolve and support ongoing learning (both ways) when things may not quite go as planned or expected. Whilst the whole Bartech team are focused and engaged Rob Lee has proved to be a pivotal contact point for EDF addressing and resolving concerns that may arise.”

Mark Bradbury ~ EDF Hartlepool

How did working with Bartech benefit you / your company on this project?

“Rob and his team at Bartech have time and time again assisted our company even when we ask for unrealistic timescales and results. They have identified and quoted for spares at each enquiry without fail.

This simple and quick response makes acquiring the right spares, right quality first time possible and allows us to return important plant back into service quicker than anticipated.

Look forward to working together in the coming years.”

Phil Keane ~ EDF Heysham

“Many thanks for your help and cooperation, most refreshing to find a business that actually puts the customer first and understands the imperfect world that we operate in.”

Williams Associates

“Please pass on my thanks to your team for the fantastic effort in getting this rearranged visit complete.

We had constraints on labour and lead time of equipment however all went seamlessly.

Please also pass this on to Matt and William and thank them for their workmanship whilst offshore, very much appreciated by all here at Fairfield.”

Martin Baxter ~ Fairfield Energy

“Bartech helped maintain & achieve our recovery plan in a safe manner & also implementing the improvements required to prevent similar incidents.

They were very adaptable to our urgent requirements and used all of their resources possible to expedite the safe return of P-7230 fire water pump.

Bartech exceeded our expectations during this intervention.”

TAQA Bratani

If you’re after a trustworthy engine specialist with an excellent track record for your job then let's get started

Get support now 01206 673101 24h

Proud to be supporting:

https://bartechmarine.com/wp-content/uploads/MAN-logo-1.png https://bartechmarine.com/wp-content/uploads/bp-big@2x.png https://bartechmarine.com/wp-content/uploads/maersk-logo@2x.png https://bartechmarine.com/wp-content/uploads/edf-logo@2x.png https://bartechmarine.com/wp-content/uploads/RR-mtu_Logo_Lockup-solution_Positive_sRGB-scaled-e1669032340714.jpg https://bartechmarine.com/wp-content/uploads/shell-logo@2x.png https://bartechmarine.com/wp-content/uploads/connoco-logo@2x.png

Get your free Engineer Resource guide today!

A collection of articles to help you improve engine reliability, performance and safety specifically for engineers, brought to you by Bartech Marine. Simply enter your email below to get instant access.

  • This field is for validation purposes and should be left unchanged.

By completing this form you are agreeing to our privacy policy.

Freeguide
free engineer resource guide
Top