Simple Aim

Posted on August 14, 2019 in Highlighted, News | Comments Off on Simple Aim

Simple Aim

As I mentioned last week, we’re heading to #OE19 – Offshore Europe in September.

This means that Bartech HQ is a hive of activity – not only do we have the usual servicing and overhauls to do, but we’re very busy getting ready for the exhibition.

We’ve got a number of things planned, like the test engine that I mentioned last week, and today I just wanted to give you a little bit more info about a few of the case studies we’ll be sharing in Aberdeen.

Our aim with all clients is simple – we want to make things safer, whilst reducing downtime in the most cost-effective way through leading technical standards and innovation.

And that’s reflected in everything we do.

During Offshore Europe, we’ll have detailed case studies available, sharing how we:

• Saved an operator over 80% against OEM recommendations, whilst delivering exactly the same end result, using OEM parts and working to their guidelines.

• Used our experience to save an operator over £2 million when a replacement engine was needed.

• Make use of our experience across multiple sectors, from oil and gas through to generators to reduce downtime, improve safety and increase reliability.

• Can re-engineer components, thanks to our experience working with OEMs.


If any of those interest you, then be sure to visit our stand (1G60) during Offshore Europe.

And if you fancy a coffee during the show, let me know and we’ll block some time out.

If you’re not able to make it to Aberdeen, I’ll be happy to share this information with you, just let me know.

If you would like to arrange a meeting during the show, send an email to info@bartechmarine.com or call +44 (0)1206 673101.

Don't miss out, fill in your details below to receive our latest news as it's posted directly to your inbox. No spam, our content is written by our engineers for engineers.

* indicates required field

By using and browsing the Bartech Marine Engineering website, you consent to cookies being used in accordance with our policy. If you do not consent, you must disable cookies or refrain from using the site.